|Place of Origin:||Zhuzhou,China|
|Minimum Order Quantity:||5KGS|
|Packaging Details:||standard packing suitable for overseas shipment: outside carton or plywood case with inner plastic box packing|
|Delivery Time:||3-15 days|
|Payment Terms:||L/C, D/A, D/P, T/T, Western Union|
|Size:||Dia5*Dia1*330mm Dia2*Dia0.25mm Customized||Hardenss:||HRA92.5|
|Grain Size:||0.6μm||Material:||100% Virgin WC+Co|
tungsten carbide rods,
solid carbide bar
YL10.2 HRA 92.5 Ground Tungsten Carbide Rod With Small Hole 0.15/0.2/0.3mm
|Porosity||A B C||A02B00C00|
|WC Grain Size||μm||0.6|
Application of tools:
Twist drill,End mill,Tap
Applications of material:
◆ Cast iron
◆ Stainless steel,Heat-resistant steel,Hardened steel(hardness<60HRC)
◆ Nickel-based, Titanium alloys
We can supply all kinds of dimensions solid carbide rods with fine&sub micron grain size We manufactured and stocked many dimensions of ground and unground carbide rod for your. We have a large range of grade for your choice. We also can develop grade based on your application.
Solid Rods and Rods with Coolant Hole
We manufactures 12” (330mm) length rods with single hole, straight two-hole in diameters from 0.3mm to 33mm. High-performance gun drill rod blanks are available.
We have one of the largest and most complete lines of ground CTL selections. Premium grades, standard and micro-finished surface finish, and h6 ISO diameter tolerances in inch and metric lengths and diameters. Special preform features are available, including male center, female center, ballnose, step reduction, and shaped points.
Production Process of Tungsten Carbide Rod:
Power mixing-Pressing-HIP sintering-Blank- Processing- Finished
Various grade for your choice
|Grain Size μm||0.6||0.8||0.6||0.6||0.8||0.8|
|YL10.2||ultra-fine grain WC+ 10% Coblat, with good Wear resistance and Toughness, strength comparatively higher,suitable for PCB micro drills,for making drills,end mill,reamer,taps,burrs etc.|
|YG6||Fine Grain WC+6% Cobalt, with Good Wear resistance, used for hard wood,processing original wood,aluminum section bar,brass rod and cast iron.|
|YG6X||ultra-fine grain size with cobalt 6%,with good wear resistance,Suitable for processing Chilled cast iron, heat-resistant alloy steel, and fine process of common cast iron|
|YG10X||ultra-fine grain WC+ 10% Cobalt, suitable for small diameter Micro drill ,vertical milling cutter, rotating file|
|YG8||fine GrainWC+ 8% Cobalt Suitable for the roughening of cast iron and light alloys and also for the milling of cast iron and low-alloy steel.|
|YG15||fine grain WC +15% Cobalt for mining tools, cold heading and punching dies|
1. we using 100% WC and the raw matearils of CO.
2. High hardness HRA89-93 ,good bending strength TRS 2800-4200.N/mm2
3. Long probation,stamping.
4. Has good wear resitance.
5. Professional manufacturer for more than 10years experience.
6. With the HIP sintered technology,the structure of tungsten carbide is more uniform,more dense,the TRS can be raised more than 20%
7. We make tungsten carbide rods extruded or pressed.
8. Customization is acceped
Part of our carbide rod Size List
We manufactured and stocked unground and ground carbide rods for you. For more size information, please kindly email or call us.
* We are real factory in Zhuzhou
* Full ability to accept OEM & ODM orders
* Manufactured with100% tungsten carbide raw material
* Comply with ISO 9001:2015 Certification
* Strict inspection for quality of raw material and finished products
* Rich experience of over 10 years
* Advanced technology , automatic pressing , HIP sintering
Our packing and shipping
Based on Detail products, we use different Standard packing suitable overseas shipment.
For carbide rod packing as following
1. outsizde carton or plywood case
2. inner packing is plastic box or small carton with cotton or paper protection
3. Shipping:UPS,TNT,EMS,Fedex,DHL, shipment by sea, or as you request.